Rustic DIY Pencil Holder - A Beginner Woodworking Project
Trying to find the remainder in function and aesthetic is a constant struggle for me. Add kids and their "stuff" into that and it feels like a loosing boxing. I try to encourage my kids creativity, allowing an fine art table to be there for them when inspiration strikes.
View in gallery Just, the clutter and mess that is their crayons and other fine art supply needs is overwhelming. I decided to create a wooden pencil holder that would allow function, organization, and visual appeal.
Materials needed to brand a wooden pencil holder:
- iv×iv piece of wood
- Miter saw
- hand drill
- woods bore
- sandpaper
- lacquer
- paintbrush
View in gallery How to craft this wooden pencil holder:
Step 1: Mensurate and mark where the holes should become
I purchased a long 4×4 forest. Information technology is a corking and bulky square, perfect for little crayons to fit in. If you are wanting to put pens or other larger items, getting a vi×6 would exist more than visually appealing. With my kids and their little supplies and hands, a four×4 size was perfect. I cut it down slightly, to be well-nigh 2 feet long. This allows for information technology to exist almost the whole length of my kids art table. Allowing whatever of the crew to reach for crayons.
View in gallery I planned to drill the holes into the wood by using a standard mitt drill with a wood diameter on the end of it. And so taking the largest wood bore and measuring and marker where the holes would go. Making certain they were centered and evenly distributed on the wood. I ended up measuring out nine holes. More plenty.
View in gallery Step 2: Drill the holes
Taking the standard drill and setting information technology in the center of my marks, I push button down with the end of the wood bore. This turns slowly and drills into the wood. It is a simple enough task, just slow going. Drilling in the 9 holes took nigh two hours. With breaks for my achy artillery. You take to put a fair amount of muscle into the drill to brand sure it is pushing through the woods.
View in gallery Like I said, really elementary. Just time-consuming.
View in gallery Step iii: Sand the forest and apply the lacquer
Once I had all ix holes in. They get almost to the bottom of the woods, so probably about 3.5 inches deep. I had intended on staining this nighttime, I love a nighttime stain. But the forest grain of this was gorgeous. So instead I spread a lacquer on to make the wood and the small details smoothen.
View in gallery Applying lacquer is similar to a standard woods stain. Instead of using gloves and a textile, I used a paintbrush. Be certain to use i you lot will be ok with throwing out. The lacquer will not come off of the brush so it is done with. Ready the piece you are working with on something other than paper. The lacquer is sticky and volition accept the newspaper stick to the slice. I used a metal sheet I had in my garage, no sticking.
View in gallery Dipping the castor in the mid gloss lacquer I chose. And then brushing it on, going from one side to the other with the grain of the forest. Y'all can go through with the brush a few times over one spot.
View in gallery Once the smooth surfaces were covered I shoved my brush in the holes to make the holes have a slightly glossy wait besides. There was a puddle in the holes, but with them being somewhat small a little pooling of lacquer wont be noticeable. Merely like with a standard stain, to know if the lacquer is dry or not cheque by how it feels. If there is still a sticky feeling to it, it is not dry out yet. Once dry, you tin do another coat if you lot want.
View in gallery This is how shiny information technology looked right after one coat of lacquer. Information technology does ho-hum a little later drying. I just did 1 coat, and it gave me the small gloss effect I was going for.
View in gallery Step 4: Fill up it with crayons
I added my kid'southward crayons and colored pencils and it was done. I was able to accept information technology hold 100 crayons and 30 colored pencils. A big amount for such a streamlined slice. The thing that I adore about how this turned out, is fifty-fifty though it is for the purpose of belongings my child's art supplies. Information technology works for an developed space. It makes fifty-fifty their art tabular array experience official and formal. I can also utilize this later on down the route when my kids are done with their obsession that is coloring.
View in gallery 
View in gallery 
View in gallery This would work for any workspace, kid or non. As of correct now the crayon colors beingness separated is fifty-fifty helping my kids proceed everything neat and organized. A game of sorting, we volition run into how long that lasts. But, merely putting them in here cleans up space instantly.
Source: https://www.homedit.com/diy-pencil-holder/
0 Response to "Rustic DIY Pencil Holder - A Beginner Woodworking Project"
Post a Comment